• G-Shock
  • Item no. GMA-S130-1ACR
  • $130.00
  • Discontinued

S-SERIES ANA-DIGI STEP TRACKER

The new G-SHOCK S Series GMAS130 counts steps while offering a fashionable and comfortable fit for daily use. Featuring a three-axis acceleration sensor, the watch starts counting steps automatically whenever the wearer begins walking, jogging,… See more

Shop now

The new G-SHOCK S Series GMAS130 counts steps while offering a fashionable and comfortable fit for daily use. Featuring a three-axis acceleration sensor, the watch starts counting steps automatically whenever the wearer begins walking, jogging, or running. The step counter automatically resets itself to zero when the date changes, and then starts counting again. When no movement is detected for a certain period of time, the Step Reminder function uses the watch display and an electronic sound to encourage the wearer to get active. Step count history is easily displayed and goal progress can be checked with the press of a button.

  • LED Light (Super Illuminator, Double)

    A light emitting diode is used to illuminate the face/display. Super Illuminator uses high-brightness LED for easier reading. Separate lighting for the digital and analog portions of the face for easy reading

  • Acceleration Measurement

    A built-in acceleration sensor detects arm movement, when walking, which is used to count the number of steps taken. With some models, measured data is also used to calculate energy consumption

  • Dual Time

    Simultaneous display of the current time in two different time zones

  • Daily Alarm, Hourly Time Signal (5)

    The daily alarm sounds each day at the time you set. The value indicates how many alarms are available. The hourly time signal causes the watch to beep every hour on the hour

  • Stopwatch (1/100 24HR)

    Accurate measurement of elapsed time with the touch of a button. The fraction indicates the unit of measurement, while the time figure indicates the maximum time measurement

  • Timer (100MIN)

    Counts down from a start time specified by you. The value indicates the number of timers available, while the time figure indicates the maximum starting time. “REPEAT” indicates Auto Repeat, which automatically restarts timing at the end of each countdown

  • Full Auto-Calendar

    Allowances are made automatically for months of different lengths, including leap year

  • 12/24-Hour Timekeeping

    Times can be displayed in either 12-hour or 24-hour format

  • Operation Tone On/Off

    The tone that sounds to signal a mode change or other operation can be turned on and off

  • Shock Resistant

    Shock-resistant construction protects against impact and vibration

  • Water Resistant (20 BAR)

    The “BAR” value indicates the number of atmospheres to which water resistance is ensured. 20 BAR means water resistance to 20 atmospheres. Watches marked “200m” have the same water resistance as 20 BAR watches

  • Mineral Glass

    Hard glass resists scratching

  • Band

    Resin

Case / bezel material: Resin
Resin Band
Neobrite
Shock Resistant
Mineral Glass
200-meter water resistance
Double LED light
LED light for the face (Super illuminator, selectable illumination duration (1.5 seconds or 3 seconds), afterglow)
LED backlight for the digital display (Super illuminator, selectable illumination duration (1.5 seconds or 3 seconds), afterglow)
Step count using a 3-axis acceleration sensor: 0 to 999,999 step count display range
Step Count History Display: Daily data (8 days), weekly data (4 weeks), number of days step count goal was reached
Step Goal Progress Display (GOAL mark; step count goal setting range: 1,000 to 50,000, 1,000-step increments)
Step Reminder: audible alert lets you know when you have not walked enough within a specific period (Can be enabled or disabled.)
Step Count Graph: Hourly step count for the past 5 hours on a 6-level graph
Step indicator
Power Saving: Auto sensor sleep state entry after fixed period of non-activity)
Dual time (Home time swapping)
1/100-second stopwatch
Measuring capacity:
00’00″00~59’59″99 (for the first 60 minutes)
1:00’00~23:59’59 (after 60 minutes)
Measuring unit:
1/100 second (for the first 60 minutes)
1 second (after 60 minutes)
Memory capacity: Up to 30 records (used by lap number and lap time)
Countdown timer
Measuring unit: 1 second
Countdown range: 100 minutes
Countdown start time setting range: 1 second to 100 minutes (1-second increments, 1-minutes increments)
5 daily alarms
Hourly time signal
Hand shift feature (Hands move out of the way to provide an unobstructed view of digital display contents)
Full auto-calendar (to year 2099)
12/24-hour format
Button operation tone on/off
Regular timekeeping
Analog: 3 hands (hour, minute (hand moves every 10 seconds), second)
Digital: Hour, minute, second, pm, month, date, day
Accuracy: ±15 seconds per month
Approx. battery life: 2 years on CR2016
Size of case / Total weight
Size of case : 49×45.9×15.5mm
Total weight : 53g

 

Sign In

Reset Password

    Locate a Dealer